Product Information
ELK Ethernet Port from Data Bus Expander/Interface
The ELK-M1XEP is an Ethernet Device Server with a RS-232 Serial Port Interface. It may be used to connect
a Control in the M1 Family to an Ethernet network using TCP-IP protocol for programming, remote control and
monitoring. It features a secure embedded web server, with a user interface built on a Java applet, and email
event notification. A software setup utility is built into ElkRP (version 1.5.0 or later) for configuring the
connection setup, network password, etc. The M1XEP is factory defaulted to obtain a dynamic IP address from a
DHCP server (i.e. Ethernet switch, cable modem, etc.), however it may also be setup with a static IP address.
* Web server with embedded Java applet "M1 Virtual Keypad"
* Secure connection with password protection and HTTPS encryption
* Flash Memory for Firmware Updating
* Event notification via E-Mail (SMTP)
* Internet Monitoring and Reporting Capability
* URL Updating using Dynamic DNS
* TCP/IP stack supporting the following protocols:
-TCP,UDP,DHCP,SSL 3.0/TLS 1.0, HTTP, SMTP
* Federal Information Processing Standards (FIPS) 128 bit encryption
* Integrated 802.3 compliant 10/100 Mbit network interface
* RS232, DB9M 9-pin serial port connection
* Connects to the M1 RS-232 Serial port (Port 0)
* RJ45 8-pin Network Jack
* 2.1mm barrel type power connector (center positive)
* LED Indicators for Power, Link, and Data
Product Specifications
* Operating Voltage: 12 Volts D.C. from Elk-P1216 Plug-in Power Supply
* Current Draw: approx. 300 mA
* Housing Dimensions: 4.25" x 6.375" x 2.125"
* Circuit Board Dimensions: 2.25" x 3.95"
* Shipping Weight -
Tell a Friend About This Product
